Pneumatic hand blast cabinets – suction and pressure

Equipment use

surface treatment of glass moulds, moulds for rubber industry, moulding forms, press tools, etc.
castings fettling
cleaning product surfaces from mechanical impurities and corrosion products
product surface pre-treatment before wet and powder coating, and electroplating, etc.
decorative treatment of coloured metals and stainless steel
decorative treatment of glass products and mirrors
surface faults visibilizing
surface hardening (shot peening)

Blast cabinets type		PTZ 100 I	PTZ 140 I	PTZ 200 I
Outside cabin measurements
- width	mm	1220	1530	2130
- height	mm	1750	1830	1830
- depth	mm	800	1030	1030
Workspace size
- width	mm	950	1350	1950
- height	mm	650	730	730
- depth	mm	750	950	950
Door opening profile
- width	mm	610	600 (840)	600 (840)
- height	mm	490	650 (380)	650 (380)
Number of doors		1	2	2
Carrying weight of grate table (even load)	kg	150	150	150
Rubber lining		workspace
Abrasive separation		sieve
Control of blasting process		foot control
Compressed air pressure regulator for blasting process		yes
Dust collector type		OP-1V
Electric connection		3x230/400V-50Hz
Total installed electric capacity	kW	0,6	0,6	0,65
Compressed air connection		3/4"	3/4"	3/4"
Total (transport) weight	kg	cca 197	cca 324	cca 432
Installation		interior
Noise level		up to 85 to 1 m from the source of the noise (does not include environmental noise)
Standard top coating shade		RAL 6021 (3020)

Suction gun type		14	12	10	9	5
Access diameter	mm	7	5	4	3	2
Exit diameter	mm	14	12	10	9	5
Nozzle material		wolfram karbid
Compressed air consumption p = 0.5 MPa	m³.h^-1	140	70	50	40	20
Recommended amount of air	m³.h^-1	160	100	80	70	50

Blast cabinets type		PTZ 100 T	PTZ 140 T	PTZ 200 T
Outside measurements
- width	mm	1220	1530	2130
- height	mm	1750	1830	2100
- depth	mm	800	1030	1030
Workspace size
- width	mm	950	1350	1950
- height	mm	650	730	730
- depth	mm	750	950	950
Door opening profile
- width	mm	610	600 (840)	600 (840)
- height	mm	490	650 (380)	650 (380)
Number of doors		1	2	2
Carrying weight of work grate (even load)	kg	150	150	150
Rubber lining		workspace
Abrasive separation		sieve
Control of blasting process		foot control
Compressed air pressure regulator for blasting process		yes
Dust collector type		OP-1V
Electric connection		3x230/400V-50Hz
Total installed electric capacity	kW	0,6	0,6	0,65
Compressed air connection		3/4"	3/4"	3/4"
Noise level	dB(A)	up to 85 to 1 m from the source of the noise (does not include environmental noise)
Installation		interior
Standard top coating shade		RAL 6021 (3020)

Pneumatic blast unit type		TTJ 6 litres	TTJ 38 litres
Maximum working over-pressure	MPa	0,8	0,8
Optimum working over-pressure	MPa	0,4 - 0,75	0,4 - 0,75
Compressed air consumption
- 5 mm nozzle, p=0.5 MPa	m³.h^-1	60	60
- 6 mm nozzle, p=0.5 MPa	m³.h^-1	-	100
- 8 mm nozzle, p=0.5 MPa	m³.h^-1	-	170
Recommended amount of air
- 5 mm nozzle, p=0.5 MPa	m³.h^-1	90	90
- 6 mm nozzle, p=0.5 MPa	m³.h^-1	-	130
- 8 mm nozzle, p=0.5 MPa	m³.h^-1	-	200
Maximum pressure tank filling
Metallic abrasive	kg	cca 20	cca 100
Non-metallic abrasive (corundum)	kg	cca 13	cca 75
Nozzle material		wolfram karbid	wolfram karbid