Inner surface blasting nozzles
Technical data
MINIBLAST
| Use | pipes diameter from 35 to 50 mm (2") |
|---|---|
| Compressed air consumption | cca 400 to 550 m3/hr |
| Capacity (axial feed speed) | cca 1 m/min |
| Blast hose | DN 13 x 6,5 mm |
CIRCLEBLAST
| Use | pipes diameter from 50 (2") to 305 mm (12") |
|---|---|
| Compressed air consumption | cca 500 to 600 m3/hr |
| Capacity (axial feed speed) | cca 1 m/min - for jetting without supporter |
| Blast hose | DN 25 x 7 mm |
SPINNERBLAST
| Use | pipes from 205 (8") to 890 mm (35") |
|---|---|
| Total compressed air consumption | cca 500 m3/hr (for jet 8 mm) |
| Capacity (axial feed speed) | ca 0.2 m/min for all diameters of pipes |
| Blast hose | DN 25 x 7 mm |
Approximate lifetime of the most stressed parts
MINIBLAST
| 51-4036/OE2 – Tungsten Carbide deflector | Steel grit blasting medium – 30 working hours Non-metallic abrasive – 10 working hours |
|---|---|
| 51-4036/OE1 – Blast head | Steel grit blasting medium – 80 working hours Non-metallic abrasive – 30 working hours |
CIRCLEBLAST
| 51-4036/OE2 – Tungsten Carbide (TC) deflector | Steel grit blasting medium – 30 working hours Non-metallic abrasive – 10 working hours |
|---|---|
| CB-112/1 – Holder - TC | Steel grit blasting medium – 80 working hours Non-metallic abrasive – 30 working hours |
| CB-116 – Case | Steel grit blasting medium – 80 working hours Non-metallic abrasive – 30 working hours |
| CB-113/1 – Throat sleeve - TC | Steel grit blasting medium – 80 working hours Non-metallic abrasive – 30 working hours |
| AHBN – Tungsten Carbide nozzle | Steel grit blasting medium – 300 working hours Non-metallic abrasive – 80 working hours |
SPINNERBLAST
| Tungsten Carbide nozzle | Steel grit blasting medium – 500 working hours Non-metallic abrasive – 100 working hours |
|---|---|
| Other parts that are in touch with the abrasive | Steel grit blasting medium – 80 working hours Non-metallic abrasive – 30 working hours |